Thanks:
0
Dislikes:
0
-
Laserjet Pro400 MFP B&W
Don't have much experience with these, but I can tell they are garbage. This unit is indicating "jam in cartridge area" There is no paper and all sensor flags appear complete and working.
Anyone have any suggestions?
Thanks
-
Re: Laserjet Pro400 MFP B&W
So.. it wont reset or does it reset then try an feed and continue to jam.
-
Re: Laserjet Pro400 MFP B&W
-
Re: Laserjet Pro400 MFP B&W
Stuck sensor flag/bad sensor
-
Re: Laserjet Pro400 MFP B&W
Five billion tiny pieces of plastic... and one of them is out of place. Sounds like fun.
-
Re: Laserjet Pro400 MFP B&W
Have you checked the small partially hidden sensors on left and right, under the lift up metal plate in that area ?
Flossed it ?
-
Trusted Tech
50+ Posts
- Rep Power
- 14
Re: Laserjet Pro400 MFP B&W
The rear cover is hinged and can be removed, then you can get access to the fuser, by releasing the green tabs on each end and pull out.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks