Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 20
Re: HP LJ 600 M603 intermittant fusing problem
This machine is hypersensitive to power. Check to make sure it's plugged directly into the wall, no power strips. Check firmware date code (on page 1 top left block of config report) and update if prior to 2016. Replace power supply.
-
Trusted Tech
50+ Posts
- Rep Power
- 14
Re: HP LJ 600 M603 intermittant fusing problem
rubber roller rejuve is used for paper transport rollers. works great on folders. never use it on fusers, fuser rollers are impregnated with silicon oil. any other oil can and will affect that roller in the fuser
-
Re: HP LJ 600 M603 intermittant fusing problem
I'm assuming they meant they had cleaned the feed rollers with that. Or maybe the reg roller. Certainly not the fuser rollers. Although, it's possible he cleaned the fuser film, to get toner off it. But IMHO, none of those things should ever be cleaned. I only clean feed rollers if I'm out of them and I want to get the customer working for a few days until I can get them. Otherwise, it's replace--never clean.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks