I installed a Maintenance Kit ( feed roller, transfer rollers and fuser) and now the machine will not fuse the image intermittently, like 1 out of 50. This problem was not present before I put in the Kit. Has anyone seen a new fuser perform that way or could it be something else. Any help would be greatly appreciated.
I have seen this many times with refurbished fusers.
Bad Heating element/Grease
Izzy
was it an OEM kit?Originally Posted by callmefirst
It was an oem kit, I went to the account yesterday and changed the paper type to thick, ran some prints and it seems to be working. Thanks for your input!
Printer is now slower and you will get ghost print over time.
Try with different paper.
Clean rollers with wd-40.
Send fuser back.They can not sell you something that does not work.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Yeah, I would return that as a defective fuser.
WTF? why would you EVER put OIL in rollers?
WD-40 works great on rollers if you dont have a spare set
Izzy
I had a similar issue with a 604 a couple of months ago. Image was light and text was not solid when viewing up close. Change setting to card stock and image improved. New fuser didn't help. Found that power supply was defective, not giving enough juice to the charge and transfer.
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Clean rollers with wd-40.
If I don't have rollers, I'll ONLY ever use:
Amazon.com: Caig Laboratories RBR100L-25C RUBBER REJUVENATOR 25 ML CAIKLEEN RUBBER CLEANER: Everything Else
Has saved me a bunch of times.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks