Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    4,716
    Rep Power
    134

    HP 4555, jams at fuser, but only from 2 trays.

    It is the full size MFP. Has the tray3,4 and 5 tray assembly. It will jam the paper as it comes out of the fuser, the exit assembly never biting it. When you go into paper path test, it only jams from trays 3 and 5. I had a fuser so I swapped it, no change. I am having a feed assembly and board sent for the tray assembly but I wanted to know if anyone had seen this before.
    The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

  2. #2
    Service Manager 1,000+ Posts
    HP 4555, jams at fuser, but only from 2 trays.


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: HP 4555, jams at fuser, but only from 2 trays.

    Sticky solenoids in those trays?

  3. #3
    Field Supervisor 500+ Posts Wild Bill's Avatar
    Join Date
    Jul 2005
    Location
    Fresno, California
    Posts
    774
    Rep Power
    55

    Re: HP 4555, jams at fuser, but only from 2 trays.

    Does it give an error?
    Izzy

  4. #4
    Technician
    Join Date
    Oct 2014
    Location
    nashville tn
    Posts
    13
    Rep Power
    20

    Re: HP 4555, jams at fuser, but only from 2 trays.

    What is the jam code? Does it jam if you run a single sheet or only on multiple copy jobs? Firmware updated? (Firmware MUST be done with trays attached).

  5. #5
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    4,716
    Rep Power
    134

    Re: HP 4555, jams at fuser, but only from 2 trays.

    The firmware was fresh. I replaced the gear pack for the trays, the rollers and the control board for the trays. It works now. Sorry I can't remember the jam code, but when I gave it to tech support and he looked it up, he was looking at the mail bin. I swapped it. I called back later, talked to a different tech, he sent the boad and gear pack.
    The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here