Scanner error 13, MFP 477

[HuronMan]

I have an HP mfp477fnw that displays a scanner error 13 when its powered on. I've done the hard reset and it's plugged directly into an outlet. I reseated the ribbon cables from the scanner to the board they're plugged into. I don't see any movement from the scanner unit and no exposure lamp lights up. It won't print any test prints. Thanks for any help.

[Printerdude]

Are you sure the display is showing scanner error 13??? or are you guessing a error 13 is scanner issue?
Error 13 are usually related to paper jams.
Error 30 are related to scanner errors.
What is the exact error message?

[HuronMan]

Says scanner error 13 on display. Image_00021.jpgImage_00020.jpg
And yes, it's a guess. I've recently been forced to service these.

[Printerdude]

Have you reattach the cables to the scanner itself?
Does the scanner assembly move freely?

[Laserrick]

I've seen this before, the scanner is shot. Replace the entire unit, no parts available - Integrated scanner assembly (M477) CF377-60104. You can get it from Ed at Metrofuser 908-245-2100 X129