Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jul 2018
    Rep Power

    CP3525DN "Close Front or Right Doors" Error

    I replaced the fuser drive gear after getting the 59.F0 error on the control panel. I put everything back together very carefully. The install went smoothly. Now when I start up the printer I get the error "Close front or right doors." I checked both the right- and front-door interlock switches and they are functioning correctly. J118 on the DC controller is securely connected, as is every other connector. What else can I check? Thanks for the responses in advance!

  2. #2
    Service Manager 1,000+ Posts theengel's Avatar
    Join Date
    Nov 2011
    North Bend
    Rep Power

    Re: CP3525DN "Close Front or Right Doors" Error

    I wonder if you can check the connections between the dc controller and the switch. Like, maybe one of the wires broke underneath the insulation and you can't see it.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here