Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: P2015

  1. #1
    Service Manager 1,000+ Posts
    P2015


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    1,234
    Rep Power
    43

    P2015

    I know this model had a lot of issues with the formatter pwb. One of my good customers has this as a backup printer at their desk. They knows it wasn't the best printer ever made by HP but would like to keep it. It is connected USB but is a network model. For it to print you have to turn off and back on then it will print until it goes to sleep then lock up again. Once it's locked up it wont print test page, etc. until you turn it off and back on.

    I suspect the formatter is bad as usual but have a question, since this customer is using USB anyway can I replace with a "NON" network formatter instead of a Net formatter. I have 2 NON formatters on the shelf that I would love to use. I upgraded all these dog 2015's a long time ago and got stuck with these boards.

    I remember back when there were a lot of these and HP stop replacing the boards we would bake the formatter in an oven to reheat the solder on board. And it worked most of the time!

    Thanks in advance


  2. #2
    Senior Tech 100+ Posts
    Join Date
    May 2015
    Location
    South Bay
    Posts
    119
    Rep Power
    8

    Re: P2015

    I see no problem swapping a non network formatter board for this printer.
    Make sure to match duplex formatter to duplex printer and non duplex formatter to non duplex printers.
    It still might work if you install a non duplex formatter into a duplex printer.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here