Thanks:
0
Likes:
0
Dislikes:
0
-
designjet 500 encoder disk sensor cover
How the hell do you remove the little black cover above the disk sensor? I believe I've done it before, but I don't remember how I got it out. Do I just force it out or do I have to remove something?
-
Re: designjet 500 encoder disk sensor cover
Supposedly it just comes out, but I've always had to unscrew the 4 screws that hold the entire top of the printer down on that end so I can jack it up a inch or so. It's the two screws at the bottom of the 'arch' in front and in back.
If you're going to replace the encoder disk, I find it easier just to take the entire top half off the printer.
Kiran
-
Re: designjet 500 encoder disk sensor cover
I don't think I've ever split one before... sounds a little daunting.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks