HP Designjet T2300 disjointed vertical lines

[Kiran Otter]

Also, looking at your picture, it's possible the belt is now pulling the carriage from too close to the carriage's side and not from in back like it's designed, which is going to torque the carriage around, I would think. Just a guess.

Kiran

PS Your repair doesn't look like the clip LPS sells. Designjet Store

[tullamore75]

[QUOTE = Kiran Otter, 715482] Също така, гледайки снимката си, възможно е коланът да издърпа каретата от твърде близо до страната на карето, а не отзад, както е проектиран, който ще върти каретата наоколо, аз ще мисли. Просто предположение.

Kiran

PS Вашият ремонт не прилича на клипа, който LPS продава. Designjet Store [/ QUOTE]
Had to be repaired quickly. Which carriage is healthier HP or LPS ?

[Kiran Otter]

I think the parts from LPS are reliable. Plus they have a 1 year warranty. HP only gives 90 days.

Kiran

[Kiran Otter]

I would order the rear bushing too if you broke it or it's missing.

Designjet Store

Kiran

[pioneer007]

If it means anything, I have the exact same issue with a HP Designjet T1700ps 44" brand new. If I run internal demo prints or diag images its all ok. All line feed and alignment auto adjust settings test ok and look fine. Any print jobs sent will do this, even the windows test print. This could be a FW issue, I'm not certain, it is under warranty I'll be calling HP tech support? Also...what's the service menu password on T1700?. I know what it is on the other Designjets but HP has changed it on this one. its different!
*I also have the double font "look" running service and usage reports.
I have also tried PCL and PS print driver different drivers nothing changes.

[Kiran Otter]

If it means anything, I have the exact same issue with a HP Designjet T1700ps 44" brand new.

I would reseat the printheads and re-run the printhead alignment.

I don't have the service manual for the T1700 yet. 3174 doesn't work to get into the service menu?

Kiran

[Lance15]

2703

[theengel]

Pretty sure your "mend" is the problem. Order a new carriage, and your problem will go away.

[tullamore75]

I ordered a carriage

[tullamore75]

Hello,
I changed the carriage and the problem remained.
I do not know what to change anymore