Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 14
500 Color MFP M570dn Noise
Makes a rubbing noise while printing , tried hand rotating TD units and pulled ITB and hand rotated it , not conclusive . Cheated the front door and tricked TD locks , ran unit while watching , tried removing single TD units and starting it up , made no difference . Close front and cheat side door and watch belt unit run , Noise seemed to occur when belt was turning part of the time , assuming maybe that there is a cleaning blade or something that engages and disengages , and further , as the belt slowed near the end of its movement the noise seemed to slow as well . 1st time I have encountered this particular model , anyone having any related noise problems ? I have the TM and RM manuals , there does not seem to be a way to run components separately . Any ideas on how to quickly trouble shoot this beast ? I am thinking ITB , but they are way over priced . Thanks in advance , Ark .
-
Trusted Tech
50+ Posts
- Rep Power
- 24
Re: 500 Color MFP M570dn Noise
I've heard a rubbing noise from a couple M570's, both times it was the transfer belt. In fact, almost every repair I've done on those ended up being the transfer belt (for IQ, noise, etc.)
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks