Thanks:
0
Likes:
0
Dislikes:
0
-
Re: CP3525
Sounds like the fuser drive gear isn't fully seated against the chassis. Like you mentioned, it is very tricky to get it completely seated sometimes. Rotating the fuser drive motor by hand helps align the asssembly correctly and it will pop into place against the chassis.
-
Senior Tech
250+ Posts
- Rep Power
- 35
Re: CP3525
UPDATE... Total time replacing fuser drive assembly for first time....5 hours.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks