Thanks: 
Likes: 
Dislikes: Hi guys...
Anyone have a clue if there is a way to reset the fuser in this model...????
Thanks in advance.
Hi guys...
Anyone have a clue if there is a way to reset the fuser in this model...????
Thanks in advance.
Did you power off the machine before installing the new fuser? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
was it giving a code before replacement? (WAIT you DID replace it right?)Originally Posted by kobi gabay
there should be instructs in the box... unless it's a compatible
HI.
I didn't replace it yet..... The old one in good condition and I'm looking a way to reset the old one like in the old models cp3525/4525/m551....
🙏🙏
then i suggest you locate a manual and follow rocedure.
AS A Certified HP tech I wouldn't do it.. nor instruct some cheap .. lazy.. half stepping idjet... 'how to'!
oh and 'emoji' doesn't get you SHIT with me pajama boi.. js
My dear friend.
maybe it's the cheapest way to do this like half of the tech on the world... But that isn't the lazy way to do this..... To replace unit is lazy!!!!!!
to rebuild one or in this case to reset one (most of the time needs to open end replace resistor or chip in other manufacturers)
Thanks any way🙏
1) I'm not your damn friend.My dear friend.
maybe it's the cheapest way to do this like half of the tech on the world... But that isn't the lazy way to do this..... To replace unit is lazy!!!!!!
to rebuild one or in this case to reset one (most of the time needs to open end replace resistor or chip in other manufacturers)
Thanks any way
2) HP has made a "rebuildable" low end fuser for decades
3) the CORRECT way (HP WAY) RELACE THE DAMN FUSER.
4) STOP with the pansy ass EMOJI!
Sent from my SM-G960U using Tapatalk
Reply With Quote
Bookmarks