Thanks: 0
Likes: 0
Dislikes: 0
Id say about 75% of the time its the p/u asm, followed by tray, and then fuser for jamming issues. The other problems with this machine are (not jamming related) laser scanner, developer disengagement plate, color registration detector, and front door switch. These are the parts I would keep on hand if you repair a lot of these machine. Hope this helps others in future.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Thanks for the info.
I may look you up the next time I run into problems.
Reply With Quote
Bookmarks