Thanks:
0
Likes:
0
Dislikes:
0
-
-
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals
Paul@justmanuals.com
-
Senior Tech
100+ Posts
- Rep Power
- 0
System Error: 21:YZ (YZ = 13 ==> Power OFF)
Problem Description: Fail moving Service Station.
Corrective Action: Try the following:
- Switch the Power OFF from the back of the Printer and disconnect thePower cord. Check the Primer Tubes. Reconnect the power cord andpower On the Printer.
- Make sure that the Service Station path is clear. Remove any visible obstacles (e.g. screws, plastic parts, etc...) restricting the movement of the Service Station.
- Perform the Service Station diagnostic test to troubleshoot the problem further ⇒ Page 4-42.
- If the System Error continues, replace the Service Station ⇒ Page 8-55.
- If the System Error continues, replace the PrintMech PCA ⇒ Page 8-66.
KHAN, give me your mail so I can send you the manual.
-
-
Trusted Tech
50+ Posts
- Rep Power
- 30
When the T1100 first came out there was a problem with PHs and the SS failing because they were spitting too much ink into the SS. They fixed this with a firmware up grade. If you replace the SS I would also upgrade the Firmware.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks