Results 1 to 5 of 5
  1. #1
    Service Manager 100+ Posts KHAN's Avatar
    Join Date
    Aug 2006
    Location
    Peshawar
    Posts
    229
    Post Thanks / Like
    Rep Power
    0

    HP designjet T 1100 ERROR 21:13

    HI,
    My HP Designjet shows ERROR 21:13 and restart printer, Each time i restart the same code comes and nothings to move,Please I need help what is it for or someone have SERVICE MANUAL for T 1100, I will be grate full.
    THANKS.


  2. #2
    Field Supervisor 5,000+ Posts


    JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,478
    Post Thanks / Like
    Rep Power
    133
    This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
    from The Internet's largest collection of manuals


    Paul@justmanuals.com

    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

  3. #3
    Senior Tech 100+ Posts suckis's Avatar
    Join Date
    Dec 2006
    Location
    Thessaloniki
    Posts
    166
    Post Thanks / Like
    Rep Power
    0
    System Error: 21:YZ (YZ = 13 ==> Power OFF)

    Problem Description: Fail moving Service Station.

    Corrective Action: Try the following:

    • Switch the Power OFF from the back of the Printer and disconnect thePower cord. Check the Primer Tubes. Reconnect the power cord andpower On the Printer.
    • Make sure that the Service Station path is clear. Remove any visible obstacles (e.g. screws, plastic parts, etc...) restricting the movement of the Service Station.
    • Perform the Service Station diagnostic test to troubleshoot the problem further ⇒ Page 4-42.
    • If the System Error continues, replace the Service Station ⇒ Page 8-55.
    • If the System Error continues, replace the PrintMech PCA ⇒ Page 8-66.


    KHAN, give me your mail so I can send you the manual.

    ! RTFM !
    My site: http://www.e-club.gr/

  4. #4
    Service Manager 100+ Posts KHAN's Avatar
    Join Date
    Aug 2006
    Location
    Peshawar
    Posts
    229
    Post Thanks / Like
    Rep Power
    0
    THANKS sir,
    I have manual for this,
    I run SERVICE STATION AND DIS but same ERROR.



  5. #5
    Technician jeff33's Avatar
    Join Date
    Aug 2009
    Location
    spicewood
    Posts
    46
    Post Thanks / Like
    Rep Power
    11
    When the T1100 first came out there was a problem with PHs and the SS failing because they were spitting too much ink into the SS. They fixed this with a firmware up grade. If you replace the SS I would also upgrade the Firmware.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here