Thanks:
0
Likes:
0
Dislikes:
0
-
Field Supervisor
500+ Posts
- Rep Power
- 41
HP 4250/Fuser Drive gear
Hi, gear on swing idler plate that drives fuser is stripped. i have new gear,can you tell me if there is easy way to access it to changr it?The frame looks like it would be real pain to take entie plate out(its the one on inner frame that has 2 gears and black gear makes contact with fuser).
Thanks Andy
-
Trusted Tech
50+ Posts
- Rep Power
- 30
The easiest way to replace the swing plate is to take the black gear and spacer off the new plate.
turn off printer take right side cover
take off formatter box
remove fuser unit
on the side where the formater is you can access the screw for the black gear that is stripped.
Hope this helps.
Rick
-
Field Supervisor
500+ Posts
- Rep Power
- 41
HP 4250/Drive Gear
HI,
Thanks for reply.I Already went to customer and replaced gear.I saw instructions on some website I found.
Thanks again, Andy
-
Technician
- Rep Power
- 0
Andy could you please send me the link for those instructions, Thanks RD
-
Field Supervisor
500+ Posts
- Rep Power
- 41
HP 4250/Fuser Drive Gear Replacement
HI. I found that link
RM1-0043 HP swing plate assembly metal gear
PrinterTechs.com Is the homepage.
ANDY
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks