fuser noise on HP2420

[vedder]

MOrning all, just wondering if anyone had any tips for this problem, I have a HP 2420 with poor copy quality due to a faulty fuser, I have replaced the fuser, but with the new fuser in it makes a loud grinding noise as if the gears are not meshing correctly, took the new one out, put old back in, no noise, spoke to the supplier who mentioned something about a "drive train" may need replacing, but looking on the parts list im a little unsure which part this is.

Any help or advice would be much appreciated.

Thanks in advance.

[prntrfxr]

We sell a kit with the following in it. It should help you.

(1) RU5-0377: GEAR, 28-TOOTH, FUSER DRIVE
(1) RU5-0378: GEAR, 20-TOOTH, FUSER DRIVE
(1) RU5-0379: GEAR, 19-TOOTH, FUSER DRIVE
(1) RU5-0331: GEAR, FUSER, 29-TOOTH
(1) RC1-3609: BUSHING, LOWER PRESSURE ROLLER, RIGHT
(1) RC1-3610: BUSHING, LOWER PRESSURE ROLLER, LEFT

[blackcat4866]

The funny part is that the machine doesn't get really noisy until you replace the fuser. Then it sounds like it's going to jump right off the desk.

I bought a couple of these kits from TSA and it works as advertised. Thanks, prntrfxr. =^..^=

[vedder]

hi guys, thanks for your help on this, I replace the drive assembly and worked a treat.

cheers.