Dear All,
Got any idea to adjust the printout density more darker from driver or machine itself?
Dear All,
Got any idea to adjust the printout density more darker from driver or machine itself?
how to enter the service mode? what is the code?
I dont have a service manual for this so i wont be able to help you too much with the service code. You shouldn't need to get into service mode to adjust print darkness. On most HP printers you can adjust density by entering regular menu > CONFIGURATION > PRINT QUALITY > PRINT DENSITY.
Hope this helps you.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
how we go to service mode?
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals
Paul@justmanuals.com
9850 is not a HP in fact its a Konica machine
ask that at konica forum about colorforce 8050 or C500
for service mode check your PM
Bookmarks