Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Oct 2009
    Posts
    103
    Post Thanks / Like
    Rep Power
    0

    Question HP Laserjet M3035 mfp

    I make one copy with this machine the copy print came out but the data light keep blinking all the time. Job cancel has been perform no job to cancel. Cold reset has been perform ok. Next I make a print out paper can out the data light keep blinking all the time. The network cable has been disconnected than perform cold reset. Make a copy again same reset. Any Idea?


  2. #2
    Field Supervisor 500+ Posts Fearless V K's Avatar
    Join Date
    May 2007
    Location
    Redding, California
    Posts
    621
    Post Thanks / Like
    Rep Power
    27
    Corrupt firmware?

    Don't take that toner with me!

  3. #3
    Dangerous with Tools 1,000+ Posts prntrfxr's Avatar
    Join Date
    Apr 2008
    Location
    Living in Exile
    Posts
    1,670
    Post Thanks / Like
    Rep Power
    44
    Does it do it when you print an engine test? (engine test bypasses the formatter and allows you to print using only the dc controller).

    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

  4. #4
    Technician
    Join Date
    Aug 2016
    Location
    Durango, CO
    Posts
    14
    Post Thanks / Like
    Rep Power
    2

    Re: HP Laserjet M3035 mfp

    Was this resolved? I have one of these and is doing kind of the same thing.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here