Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    HP 4345 Scanner Initialization

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49

    HP 4345 Scanner Initialization

    Hi friends,

    I disassembled and cleaned optics now i get SCANNER INITIALIZATION!!!

    Will I solve this problem with procedure found in SM?

    1. From the Home screen, touch Administration.
    2. Touch Troubleshooting.
    3. Touch Calibrate Scanner and then follow the instructions in the onscreen dialog box.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Sep 2009
    Posts
    118
    Rep Power
    31
    I don't think it will even let you b/c sounds like the scanner never intializes. I had one like this and never got it to work. My process was firmware upgrade, cold reset, disk initialization, replaced the formatter, replaced the pcb board thats behind the scanner were the ADF connects. All failed with no success. I think what I had ended up being a bad scanner. I sent it back to company as it was still under warranty with them and all the usual solutions did not resolve the issue.

    Do you have another machine that you can switch the formatter or other parts from?

  3. #3
    Service Manager 1,000+ Posts
    HP 4345 Scanner Initialization

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49
    No, this is the only one I've ever seen.
    Machine works in print mode, no copy function!

    it was mistake disassembling that scanner. I removed the frame with 4 screws with flat cable... Believe it has factory settings and i can't assemble like it was before.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Sep 2009
    Posts
    118
    Rep Power
    31
    I would power it back off and go back in. Check all your connections to the boards make sure you didn't knock something loose there. When you boot the machine does the scanner light up? What if you go into diagnostics have you tried any of the scanner tests in there?

    Not sure what you mean by can't assemble like it was before. If you do a cold reset on the device it would reset all factory settings.

  5. #5
    Service Manager 1,000+ Posts
    HP 4345 Scanner Initialization

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo
    Posts
    1,311
    Rep Power
    49
    Problem solved.
    It took me 3 hrs to adjust right position.
    not the best quality, but it works

    Whole scanner assy was dismantled in parts (lamp, lens, mirrors...)

    Thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here