Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    kazu
    Guest

    HP LJ 1300 creases

    I changed the fuser but still the problem persists, also did halftest,Made sure print media is loaded correctly and that the guides fit properly against the media stack...


  2. #2
    Master Of The Obvious 10,000+ Posts
    HP LJ 1300 creases

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,402
    Rep Power
    249
    Did you try some fresh paper? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Dangerous with Tools 1,000+ Posts
    Join Date
    Apr 2008
    Location
    Living in Exile
    Posts
    1,654
    Rep Power
    0
    Fresh paper is important, but make sure that the fuser is seated properly. I don't remember for the 1300, but 1320 & P2015 have holes that accept pins from the paper guide. If the fuser is installed on top of the paper guide or the entrance guide of the fuser gets pushed out of position during installation, you can have wrinkling issues. Also, you can open the back door to allow paper to bypass the delivery asm to rule that out too. A bad cartridge can sometimes cause wrinkling. Hope all this helps you.


  4. #4
    kazu
    Guest
    Thanks guys let me try and will let you know


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here