Customer complaining machine does not print, displays warming up message. works again after power cycled (sometimes more than once) Tried a new fuser but still a problem. Any suggestions!
Customer complaining machine does not print, displays warming up message. works again after power cycled (sometimes more than once) Tried a new fuser but still a problem. Any suggestions!
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals
Paul@justmanuals.com
Any errors recorded on the Error Log? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
is this happening coming out of powersave?
i hate to say this but if someone is asking for help why do some feel they have to peddle their goods. Help the person or dont troll and spam
Formatter issue would be my guess. Just a thought, did you try updating firmware?
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
I don't think there was anything in the error log, will start by updating firmware.
Thanks to all that responded.
Upgraded firmware, disabled powersave, installed EIO jet direct card. Think its fixed.
Bookmarks