Thanks: 0
Likes: 0
Dislikes: 0
I'm trying to replace some gears that are busted in the 500 sheet tray pick-up assembly, but I can't find the part numbers for the individual gears. All I can find is the part number for the whole assembly which is RM1-0056-000CN. If anybody could tell me the part numbers of the gears, I would greatly appreciate it.
Thanks.
Just because you're not paranoid doesn't mean they're not out to get you.
O.o
WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.
I've gone through this on another similar thread.
The best you can do is get out your magnifier and look for Canon part numbers printed in the plastic.
You'll be surprised. A lot of these parts do have a part number on then, but it's so small...
The seven digit part number I found on my feed shaft was 1/4" long inside a crevice in the plastic. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Holy cow those numbers are tiny! No wonder I hadn't noticed them before. Thanks blackcat.
Just because you're not paranoid doesn't mean they're not out to get you.
O.o
WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.
Reply With Quote
Bookmarks