Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 29
hp color 8500 svc mode
hey there,
can anyone tell me if its possible to reset the "drum life counter"
not sure if if this correct but i was able to access the service mode
from the ready state it showed nothing about drum life, just drum motor devo motor
etc.. is there another procedure to access the service mode and can it be done?
thanks in advance for your help
-
-
Trusted Tech
50+ Posts
- Rep Power
- 29
thanks for replying back, how about a pico fuse of some sort / does a new drum have some kind of fuse that blows when a new drum is installed so it can reset the counter? if not then how does it reset?
-
Junior Member
- Rep Power
- 0
It is possible. If you have EPROM Flash programmer you can program drum chip with new drum chip dump. The chip is Atmel 93C46 and is programmable with most of EPROM Flash programmers
-
Trusted Tech
50+ Posts
- Rep Power
- 29
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks