Hello all, Got a 4515x with 128k prints on it. JAMS WITH THESE CODES BUT ONLY WHEN DUPLEXING. printed hundreds of test pages single sided. found a torn paper 2days ago and never jammed so I left. Anyone have any luck with these things?
Hello all, Got a 4515x with 128k prints on it. JAMS WITH THESE CODES BUT ONLY WHEN DUPLEXING. printed hundreds of test pages single sided. found a torn paper 2days ago and never jammed so I left. Anyone have any luck with these things?
Chances are the registration is worn, and the feed assy. too. Sensors in the paper path may be dirty.
Idon't have the manual for this model...what, specifically, are the definitions on those codes? Also, have you performed whatever PM steps are necessary at this point? (You probably should).
13.20 error is a generic paper jam and can occur anywhere in the printer.
Where in the printer is it jamming? Where does the leading edge stop?
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
I suggest replacing the fuser assembly
Izzy
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
http://www.justmanuals.com
Paul@justmanuals.com
Bookmarks