Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jan 2010
    Location
    pompano beach
    Posts
    121
    Rep Power
    17

    Problems with LJ 3005n

    the machine doesn't fully boot it hangs and when it does I cannot access the control menu from the front. And When printing it needs to be power cycled to reset the print job, it prints then it fails to print. Any ideas what this might be? Thanks


  2. #2
    Dangerous with Tools 1,000+ Posts
    Join Date
    Apr 2008
    Location
    Living in Exile
    Posts
    1,654
    Rep Power
    0
    Formatter board. I'm sure someone here can tell you how to put it in your oven to fix it or you can buy another one.


  3. #3
    Trusted Tech 50+ Posts gordie's Avatar
    Join Date
    May 2008
    Posts
    69
    Rep Power
    20
    Yes sounds like a formater board, possable firmware upgrade gone wrong! Cook in an oven @350 for 8 min or try a new board.

    gordie


  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jan 2010
    Location
    Wenatchee, Washington
    Posts
    532
    Rep Power
    29
    Everyone's oven temp varies.

    I would bake at about 370 deagrees for the 8 minutes. Make sure the oven is pre heated.

    And I have repaired many formaters this way. You have cracked solder joints on the board and heating in the oven melts the solder . repairing the formater. You have nothing to loose.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here