Thanks:
0
Likes:
0
Dislikes:
0
-
Service Manager
250+ Posts
- Rep Power
- 34
I tried the disk init and nothing, still the same EWS screen with just two tabs and green skin. I can't figure this out. I also updated all the firmware to no avail.
-
Senior Tech
100+ Posts
- Rep Power
- 31
Maybe a cold reset with a disk init at same time. I have seen a cold reset work and than sometimes not work. Also have seen a disk init work and sometime not work. Most instances I have ran into with this has been resolved with a disk init.
I would try to do a CR and disk init at same time. Ya firmware upgrade has never worked for me with this issue.
-
Service Manager
250+ Posts
- Rep Power
- 34
Cold reset did the trick. Thank you once again TommyH.. if i ever meet you, the drinks are on me.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks