Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 29
4250 13.20 error
Have a 4250, recently replaced swing arm assy and installed maintenance kit. Worked for 2 days, now is coming up 13.20.00 error, jam inside rear door. Replaced fuser with know working one, check sensor actuators to see if any were sticking, none are. Book says DC controller, but was hoping someone has run into this before. Checked all connections, everything seems fine. Thanks for your help. Jeff M.
-
Remove tray 1 assembly and make sure theres not a scrap of paper in there. Theres a sensor flag that is attached to the feed roller assembly. Most common 13.20 error.
-
Senior Tech
100+ Posts
- Rep Power
- 29
It was the DC controller. Thanks for your response, Wild Bill. Jeff M.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks