no feed motors at print machine initializes but adf doesnt do its thing then gives error code. any suggestions?
no feed motors at print machine initializes but adf doesnt do its thing then gives error code. any suggestions?
Is your customer willing to pay 2 hours labor minimum to troubleshoot that machine? If not, carry to nearest dumpster and throw it in.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Replace scanner assembly; But yea dumpster time
or um, adf assembly
I have replaced the adf, same prob.
I was going to replace the formatter any tips on this?
It has been awhile since I worked on that box Thank God, but I would suspect the HD. I dont think the ADf will work without it. and it could be flaking out. You could try and reformat then load firmware but all that is a pain in the butt. The formatter should just plug n play.
Bookmarks