Thanks: 0
Likes: 0
Dislikes: 0
Removed transfer belt, installed new belt, and forgot to change transfer roller. Tried to remove belt see transfer area and belt will not come out. Locking arm has been rotated to unlock position. Went in with no problems but will not come out.
Anyone have this problem? Heard of another tech with this problem and he forced it to come out. Broke a whole bunch of stuff and rendered the machine unrepairable. Would prefer that not happen with this one. Any ideas?
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Got it! All supplies have to be removed and reinstalled. Then the message is cleared from Configuration>Resets>Reset Supplies menus. Just in case anyone wants to know. I feel real dumb on this one but most people don't bring HP 9500's in shop.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Reply With Quote
Bookmarks