Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    smithcastle
    Guest

    3000 Sheet Stapler/Stacker no power LED

    Greetings all,

    I'm trying to troubleshoot an HP 8085A stapler stacker that doesn't power up. I've purchased and replaced the power supply and still have no power to the unit. Does anyone have a suggested next step or part to replace? I was thinking the stapler/stacker PCA would be the next piece to try. Any advice is appreciated.

    Michael Smith

  2. #2
    smithcastle
    Guest

    Re: 3000 Sheet Stapler/Stacker no power LED

    Anyone? No ideas or suggestions?

  3. #3
    Service Manager 1,000+ Posts
    3000 Sheet Stapler/Stacker no power LED

    prntrfxr's Avatar
    Join Date
    Apr 2008
    Location
    Living in Exile
    Posts
    1,638
    Rep Power
    58

    Re: 3000 Sheet Stapler/Stacker no power LED

    I would say you are probably on the right track. Providing you know your source voltage is good and that the switch isn't broken (you changed it so that shouldn't be a problem). You could test the connector going into the controller and make sure power is going to it. The power supply sends a signal to the controller and then the power is supplied to the rest of the unit. See attachment.
    Attached Files Attached Files
    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here