HP 4100 reset

frank · 05-12-2005

how do I reset a maint light on a hp4100, it not the same as a 4000?

**raym** · 05-13-2005

press and hold down left side of the \"item\" and \"value+\" buttons while turning printer on. release buttons when \"reset maint. count\" appears in display.
to verify it has been reset, press \"menu\" until \"information menu\" appears. press \"item\" until \"print configuration\" appears, then press \"select\" to print \"config. page\".

good luck,
ray

**10871087** · 05-14-2005

there is a list of all the hp pm light reset procedures posted in the download section on this site, gotta keep that one in the truck B)

Sally · 06-29-2005

I have followed instructions as I understand them but can not get this to work.
Perhaps misunderstanding what buttons are \"item\" and \"value\" placement.
This is HP4100mfp series. Tried top, bottom, left and right to the select

pensivetm · 09-09-2008

just remove the misformed html tags to read the text:

press and hold down left side of the item and value buttons while turning printer on. Release buttons when reset maint. count appears in display.
to verify it has been reset, press menu until information menu appears. press item until print configuration appears, then press select to print config. page.