Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
Does anyone have DISK INIT instructions for CM4540? I've searched/Googled, no joy.
All of the instructions I encountered where for other models, ones that have a different button-set (I have no dedicated "menu" key, for example).
This CM4540 has been a PIA since we bought it... I hope this model is not representative of what HP wants to put in SMB and small enterprises!
-
Re: Does anyone have DISK INIT instructions for CM4540? I've searched/Googled, no jo
Are you trying to replace a hard drive and not having it initialise, or are you getting a message like EIO (number) Disk Initializing?
-
Technician
- Rep Power
- 27
Re: Does anyone have DISK INIT instructions for CM4540? I've searched/Googled, no jo
The boot-up screen stops with "disk check 41%"
-
Re: Does anyone have DISK INIT instructions for CM4540? I've searched/Googled, no jo
Sounds like the hard drive is either going flaky or doesn't have a good connection to the formatter board. Try reseating all of the connections and look at downloading and installing the latest firmware from HP's site.
Sadly, this is what HP considers a business class machine...
-
Technician
- Rep Power
- 27
Re: Does anyone have DISK INIT instructions for CM4540? I've searched/Googled, no jo
I was able to access the admin functions:
Wait until all 3 LEDs were solid, press the STOP button.
admin password is 11454010
I performed a CLEAN DISK, which required me to have firmware available (I elected to use USB thumbdrive).
It's back up (for now).
Thanks, once again, to the folks cruising these forums. You rock.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks