PCL XL error
Subsystem: GEDI
Error: InsufficientMemory
Operator: ReadImage
Position: 860
When printing pdf. Anyone knows how to fix this error
PCL XL error
Subsystem: GEDI
Error: InsufficientMemory
Operator: ReadImage
Position: 860
When printing pdf. Anyone knows how to fix this error
Have you updated firmware?
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
I just fixed a 4250 (Base Model) with a similar error; Every print out it would spit out an extra page with the error on it;
PCL XL error
Error illegal operator sequences; Also had a bunch of differant errors, but always with PCL XL error at the beginning
I found they were using an external Jet Direct unit 170X; We have like 300 4250's in the field but they all use 620 0r 625 cards with no issues like this so I
Replaced It with a 620 Jet Direct; Have not had any issues since
Izzy
Bookmarks