Thanks: 0
Likes: 0
Dislikes: 0
Machine was working OK but after rebuilding the Paper Feed Assy #1 it shows:
Error light is on (Achtung) and the progress bar stays as in the picture.
Also, during install the machine had to be moved to another workplace and in the process it suffered a light jolt on the left lower corner where the mains connector is located. (it slipped out my f#cking rheumatic hands)Except of a slightly cracked cover there is no indication of other mechanical damage.
Hans
Reseating the formatter assembly did the trick......
Hans
Whew! That was simple.
Don't drop it again. (That's all the advice I've got for now.) =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Another satisfied customer.Originally Posted by Hansoon
Reseating the formatter assembly did the trick......
Hans
Posting Permissions
Reply With Quote
Bookmarks