Originally Posted by
Sheppard
I've had a similar problem with this MFP, in my case the ADF would keep trying to feed sheets on a copy job when none were present. In each case it was the adf paper detect flag being stuck down intermittently. When you see the problem does the adf roller keep cycling down to pull the paper and no paper is present? This the problem that I'm seeing with this adf. In all three case the unit was under HP warranty and I replaced the ADF assy' and have not had the problem since. I believe that this problem with the flag could be fixed since the flag is hitting the side of the u shaped sensor, but since I've not had a non warranty I have not tried to repair. (Push down pretty hard on the flag with your finger and see if it sticks sometimes)
Bookmarks