image drum

**4raddoo** · 08-21-2013

i have hp 2840 and the image drum % is 0% so it cannot print can some one help me now

**Luther** · 08-21-2013

Replace the drum...

**jaybug** · 08-22-2013

Originally Posted by Luther

Replace the drum...

^^^^^^^ what he said

**shtrouble** · 08-31-2013

The drum has a chip and collects waste. Replace the chip and also empty the waste toner.

**4raddoo** · 10-16-2013

please where can i get the chip

**JustManuals** · 10-16-2013

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

**shtrouble** · 10-17-2013

I get mine from

Imaging Solutions (AustralAsia) Pty Ltd.

Sydney
2/20 Wilmette Place
Mona Vale

NSW 2103
Tel: + 1300 88 37 40

International: +61 2 9999 0722
Fax: +
61 2 9999 0744
Email:
info@imagingsolutions.com.au

Web:
www.imagingsolutions.com.au

**Wild Bill** · 10-17-2013

My printer says its out of toner what do i do?

**Exok** · 10-18-2013

My printer says its out of toner what do i do?

You take out the toner cartridge and shake it very hard for about a minute and then put it back in...duh!

**shtrouble** · 10-18-2013

Originally Posted by Wild Bill

My printer says its out of toner what do i do?

Find out which toner is out and replace it. Should be able to do that on the control panel (supplies status). Shaking the toner will not make any difference. If it is a new toner cartridge, then the chip on the toner has not been replaced.