Powers up of but after display goes dark with question mark (?) in upper right hand corner of display
Powers up of but after display goes dark with question mark (?) in upper right hand corner of display
check memory, I am guessing on this one. When I see a blank screen and the screen works I head for the memory then formatter. Is it possible a wire got pinched somewhere. will it still work even when the screen is blank. Now it could also be a power supply issue. and of course always check your power source for ground to neutral, unplug machine and then reboot.
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
If it has a network card, HDD or other EIO device remove it and power up the printer again. See if the problem remains. If it does or the network port is built into the board, it is probably the formatter.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Bookmarks