Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Field Supervisor 500+ Posts
    Laserjet 9050 ( 3000 sheet stapler stacker )


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    855
    Rep Power
    35

    Laserjet 9050 ( 3000 sheet stapler stacker )

    Indicating that the lower finisher tray is full. I blew out the sensors best I could. I didn't have torx drivers with me to take covers off and investigate further. Have to go back.


    Was able to get one set to staple after blowing out sensors but message came back up right after stapled set was ejected onto lower tray.

    Account is far away and wanted to know if there is anything common that goes bad, sensors etc.

    Thanks in advance


  2. #2
    Service Manager 10,000+ Posts
    Laserjet 9050 ( 3000 sheet stapler stacker )

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    141

    Lightbulb Re: Laserjet 9050 ( 3000 sheet stapler stacker )

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here