Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Service Manager 1,000+ Posts
    Laserjet 9050 ( 3000 sheet stapler stacker )

    Join Date
    Sep 2005
    South Jersey
    Rep Power

    Laserjet 9050 ( 3000 sheet stapler stacker )

    Indicating that the lower finisher tray is full. I blew out the sensors best I could. I didn't have torx drivers with me to take covers off and investigate further. Have to go back.

    Was able to get one set to staple after blowing out sensors but message came back up right after stapled set was ejected onto lower tray.

    Account is far away and wanted to know if there is anything common that goes bad, sensors etc.

    Thanks in advance

  2. #2
    Service Manager 10,000+ Posts
    Laserjet 9050 ( 3000 sheet stapler stacker )

    JustManuals's Avatar
    Join Date
    Jan 2006
    Las Vegas, NV
    Rep Power

    Lightbulb Re: Laserjet 9050 ( 3000 sheet stapler stacker )

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here