Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Service Manager 1,000+ Posts
    HP LJ2430 grinding soundfrom fuser area.


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,149
    Rep Power
    33

    Thumbs up HP LJ2430 grinding soundfrom fuser area.

    Drive and idler gears appeared okay. Removed fuser unit and it seemed to have excessive resistance when trying to turn manually but wanted to check before ordering to see if I am missing something. Frank/ActionPhotocopy


  2. #2
    Senior Tech 100+ Posts
    Join Date
    Aug 2009
    Posts
    225
    Rep Power
    20

    Re: HP LJ2430 grinding soundfrom fuser area.

    Quote Originally Posted by axyun View Post
    Drive and idler gears appeared okay. Removed fuser unit and it seemed to have excessive resistance when trying to turn manually but wanted to check before ordering to see if I am missing something. Frank/ActionPhotocopy

    The press roller bushings usually wear out and crack. You can replace them with the drive gear kit. Bushings come with it. Do the feed gear kit (any supplier will know what this is) and fuser for best results.


  3. #3
    Master Of The Obvious 10,000+ Posts
    HP LJ2430 grinding soundfrom fuser area.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,402
    Rep Power
    249

    Re: HP LJ2430 grinding soundfrom fuser area.

    I go to TSA World for the gear kit. It will include the fuser coupler gears, pressure roller gear and pressure roller bushings. While you're in there it's good policy to clean the heater element and re-lubricate the fixing film with Uniflor 8172 fixing film grease.

    http://www.precisionroller.com/searc...4800&x=16&y=12

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  4. #4
    Service Manager 1,000+ Posts
    HP LJ2430 grinding soundfrom fuser area.


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,149
    Rep Power
    33

    Thumbs up Re: HP LJ2430 grinding soundfrom fuser area.

    Thanks a lot guys. I'll order the kit. Frank


  5. #5
    Service Manager 250+ Posts HP:guy's Avatar
    Join Date
    Feb 2013
    Location
    World Wide Web
    Posts
    281
    Rep Power
    14

    Re: HP LJ2430 grinding soundfrom fuser area.

    Double check the swing arm assembly. That's what drives the fuser.
    make sure that gear is stripped.
    It will cause a lot of noise.


  6. #6
    Senior Tech 250+ Posts
    Join Date
    Sep 2010
    Posts
    314
    Rep Power
    18

    Re: HP LJ2430 grinding soundfrom fuser area.

    I've heard of this issue before. The problem was the fixing film grease.


  7. #7
    Service Manager 1,000+ Posts
    HP LJ2430 grinding soundfrom fuser area.


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,149
    Rep Power
    33

    Thumbs up Re: HP LJ2430 grinding soundfrom fuser area.

    Thanks guys. Chsnged gear kit w/ pressure rollerbushings + okay. Frank


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here