Originally Posted by
Solotime
So I have read the service manual and online info about this problem. Since FN101 Main Fan is not turning I am assuming that it is either the fan or the power supply. My next step would be to go out to the customers office and pick up the unit and bring it in for further diagnosis as it sits in basically a closet with no room to work. What I am asking here is in these cases is it more likely just the fan or is the power supply the more common fault?
In case it is needed here the machine goes through the ABCDEF "blocks" then as it goes through them again more quickly it stops at E.
Thanks in advance!
Edwin
Bookmarks