![Thanks](https://www.copytechnet.com/forums/dbtech/thanks/images/thanks.png)
Thanks:
0
![Dislikes](https://www.copytechnet.com/forums/dbtech/thanks/images/dislikes.png)
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 33
HP CP2025 code 49
This one came in this AM. Svc manual says for code 49 to unplug for 30 sec. & plug back into wall, not into a surge protector. Code comes right back can anyone confirm this might be a power supply issue?
Copymutt
-
Senior Tech
100+ Posts
- Rep Power
- 24
Re: HP CP2025 code 49
Clear the print queue and restart the machine. Try updating firmware and driver. Try and see if it works on another power point. Try on your laptop. If none of that works it is most likely a busted formatter board.
-
Senior Tech
100+ Posts
- Rep Power
- 33
Re: HP CP2025 code 49
Thanks, but can't get it to recover,even w/ net cord unplugged. Don't understand why svc manual doesn't provide more detail on cause.
Copymutt
-
Senior Tech
100+ Posts
- Rep Power
- 24
Re: HP CP2025 code 49
You have a busted formatter. Hp service manuals have progressively gotten worse over the last 5 years or so.
-
Senior Tech
100+ Posts
- Rep Power
- 33
Re: HP CP2025 code 49
Thanks for the confirmations. On to better things like attorneys that can't operate a copier.
Copymutt
-
Junior Member
- Rep Power
- 0
Re: HP CP2025 code 49
update your firmware if it does not work the formatter board might be bad
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks