Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts Imsdal's Avatar
    Join Date
    Aug 2009
    Location
    Anderstorp
    Posts
    111
    Rep Power
    31

    HPLJ CM2320nf MFP

    Hi there.

    I have a HPLJ CM2320nf that show only the logo and a rectangel on the display.
    I have try a cold reset but no use.
    Is there any way I can go around this issue.


    Sincereley

    Imsdal
    Attached Files Attached Files

  2. #2
    Field Supervisor 500+ Posts Wild Bill's Avatar
    Join Date
    Jul 2005
    Location
    Fresno, California
    Posts
    774
    Rep Power
    55

    Re: HPLJ CM2320nf MFP

    reseat everything on the formatter connectors dims ect... Possible memory or formatter try NVRAM reset
    Izzy

  3. #3
    Junior Member
    Join Date
    Aug 2011
    Location
    birmingham, al
    Posts
    7
    Rep Power
    0

    Re: HPLJ CM2320nf MFP

    Most likely a bad formatter board although I have had the fax modem cause this also.
    There's no way around it without changing the boards that I know of.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here