in some C452 machines can't print on Thick 4 . Who can help me?
in some C452 machines can't print on Thick 4 . Who can help me?
When you say “can’t” print can you be more specific!?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Color OHP enabled??
If you send a job to the MFP with Thick 4 as the media, the only option you should be able to print from is the bypass tray. Standard trays only support up to thick 3. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
What is the Jam code? Have you matched PC Paper setting to machine tray settings?
Also having this issue, did you get anywhere with it?
What level of firmware have you got on the machine? There is differentiation of Soft SW for each version of firmware.
Are you printing on transparencies? Have youtried 3M brand "CG3700"
Have you tried using the Grey Pick-up roller instead of the orange one?
As Emujo said you can use only Bypass for Thick4 and 50 sheets max.
Can you feed Thick 3 top of the range? Let say 250GSM from Bypass?
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
I would not recommend this machine for thick stock.
Selling it to a print shop is a bad idea.
Its good for a thick print every once in a while.
Whatever
HI every one
i have also this problem with C452 :
when i chosse the right type of paper ,i can't print on thick paper 1, thick paper +1, thick paper 2,thick paper 3,thick paper 4.
but when i chose for exemple Paper ordinary and even if i put a thick paper 2 in machine it's printing ,
i had this problem with a C451 and i resolve the problem by changing a small card in the machine and its working ,
thanks a lot
Bookmarks