Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Bizhub c220

  1. #1
    Senior Tech 250+ Posts CrapAimer's Avatar
    Join Date
    Jan 2010
    Location
    Glasgow
    Posts
    296
    Rep Power
    31

    Bizhub c220

    Is there any way of adjusting the doc feeder leading edge.

  2. #2
    Senior Tech 100+ Posts Dickie's Avatar
    Join Date
    Nov 2011
    Location
    Leicester
    Posts
    187
    Rep Power
    27

    Re: Bizhub c220

    You should set it with the test original provided with the doc feed at installation and can use this document to re register the values via service mode.

    If you wish to vary it from how it sets itself up then the only way i can think of to do this would be to place the original test chart on the glass either forward or backward of the lead edge line and make a standard copy.

    Then use this original to calibrate the doc feed via service mode. This should vary it's setting as the black outline areas it calibrates to will be in slightly different places.

    Hope this idea helps

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here