most of the time get this smudge stain on top right corner black prints only and mostly on First Print or copy?
is it K IU or transferbelt? the colors come out fine
79141F14.jpg
most of the time get this smudge stain on top right corner black prints only and mostly on First Print or copy?
is it K IU or transferbelt? the colors come out fine
79141F14.jpg
Image enhanced and contrast increased for better view
defect is on the upper right side of the paperCopy of 79141F14.jpg
Still a little hard to see on my screen, but with the enhanced image, it looks like it goes across the entire top of the paper. Based on that observation, it doesn't look like the streaking defect goes from the edge of the paper to the other edge of paper, it looks like it cuts off within the "image" area of the page, and if that is the case, I'd look at the image unit first. If it were from edge to edge, then I might start with removing and cleaning the transfer belt cleaning unit.
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...
Try adjusting the Transfer Belt-Cleaning Bias first. positive +5
I just install a new transfer belt when I see that. Its the belt cleaning section.
Bookmarks