bizhub 350 that when customer puts in 50 but only wants 5 tries to stop job but it will not stop. if you push reset or clear it sets copy back to 1 but continues to copy. push stop the job comes up in window but doesnt allow you to choose it so it continues to complete job. what could be the issue that it doesnt stop the copy process. thanks
In some MFPs pushing the reset button twice fast will bring up the screen to delete the job. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
If customer is on contract I don't see the problem
Is the Start key stuck down, damaged, or pounded to death? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
button looks and acts fine. not stuckOriginally Posted by blackcat4866
Does your ohmmeter agree? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks