While printing there is black line on every printout, on every print light to heavy stock
Please advice what is the problem
Please see attached PDF document, you can see sample color pages
Thank you in advance
Color.pdf
While printing there is black line on every printout, on every print light to heavy stock
Please advice what is the problem
Please see attached PDF document, you can see sample color pages
Thank you in advance
Color.pdf
Replace K drum unit or clean charge corona.
Whatever
You can do the color IU's as well they look shot.
Whatever
change the DRUM unit black
What have you done so far? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
id check K Drum/ Dev and Transfer Belt
I doubt its any more complicated than that
I am 100% sure that the K drum is the problem and you have to change it
But image defects on each colour looks the same that's why for at least that fault, look at ITBU
Sent from my SM-G900I using Tapatalk
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks