Error 9401 lamb...anything to add ...not sure on parts!
Error 9401 lamb...anything to add ...not sure on parts!
Trouble type Exposure LED lighting failure
Trouble code C9401
Rank A
Detection timing The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment.
Trouble isolation Scanner
Relevant electrical parts • LED exposure unit (LU201)
• Flat cable (LED exposure unit)
• CCD board (CCDB)
• Scanner drive board (SCDB)
• Printer control board (PRCB)
• MFP board (MFPB
Replace CCD assy. This is a common issue. Good Luck getting one they are on BO so many of these are failing.
Sure, clean the white reference and optics. Then when that doesn't fix it, replace the CCD. I've seen a couple myself.
Now explain to me about the lamb.
chris-lamb.jpg
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks